BLACK FRIDAY DISCOUNT CODES; 1packbf70 - 2packbf80 - 3packbf80



BINGE BOX TV Series Quick Start Guide - Customer Support Number: 1-888-419-9666 ext 1

Package Contents:

Push Button Remote Control
HDMI Cable
Power Supply

If your package does not contain the entire list of items please call our customer support number.  (888) 419-9666 Ext 

Remote Control Setup:

Remote Control:

I. Flip remote over.
Remove battery cover by pressing on the arrow and sliding back.
Install the batteries (not included); the flat end of the battery goes against the spring.
Replace the cover.

Mouse setup:  If Purchased Does Not Come with Mouse
Flip the mouse over.
Remove battery cover by prying it up with your finger nail.
Install the batteries (not included); the flat end of the battery goes against the spring.
Replace the cover.
There is a small on/off switch on the bottom of the mouse (not all) turn it on you should see a red light come on, if you don't check and make sure the batteries are installed correctly.
Just below the battery cover is the storage compartment for the wireless USB chip for the mouse, if you see a small black rectangle made of plastic sticking out pull it out and insert it into one of the USB ports in your binge box. If it is not in your mouse check your binge box to see if it is already inserted into the box. If you do not have it please call our customer support number.

HDMI Cable Connection:
On the back of your TV find an open HDMI port.
Insert one end of the HDMI cable into the port, HDMI ports are numbered, so if you have more than one check to see which port you will need to know later on when you select the source on TV set.
Insert the other end of the cable into the HDMI port on the back of your binge box.

Connecting the other cables to the BINGE BOX box:
If you are going to use an Ethernet cable to connect to the internet insert one end in to the
Ethernet port on the back of your binge box, the other end should be connected to your router.
Plug the power adapter in to a surge suppressor type power strip. Plug the other end into the small round power port on the back of your binge box.

Selecting the source on your TV set:
I. Turn on your TV set.
If you do not see the home screen for your box you need to change the input source. If it on the screen you can skip to "How to setup your wireless (WI-Fl) connection".
On your TV remote control find the button that says t'source" or "input" and push the button.
Using the up and down arrows on your remote highlight the HDMI port you connected your HDMI cable to an then press the "Ok" or "Enter" button, your TV should switch to that input source. If you don't see the home screen and you have more than one HDMI port try selecting a different port. If you still don't see the home screen call our customer support number and someone will help you.

How to check your internet connection and setup your wireless (WI-Fl) connection:
On the home screen look in the top left corner, if you are connected using an Ethernet cable you will see an icon of two computer screens, if you see them that means you are connected and you are ready to use your BINGE  box. If you don't check that both ends of your Ethernet cable are connected correctly and reset your router by unplugging it, waiting 20 seconds and then plugging it back in. If you still are not connected call our customer support number.

If you are going to connect wireless and there is no icon in the top left hand corner of your home screen, you will have to setup your wireless connection.
On the home page find the Settings box, click on it
On the next screen double click the first box in the top row it should be labeled Network.
On the right side of the screen click on WI Fl.
Click on WI-Fl Device.
Click the "on" button, it will switch back to the previous screen, you will see that it is scanning for available networks, when it finds them it will give you a list.
From the list click on your network, if you don't know the name it should be on the side of your router.
Enter your password, if you don't know what it is check the paperwork you got when the router was installed or call your internet provider.
After about 30 seconds it will say that you are connected, once you see that click the right mouse button several times until you get back to the home screen.
In the top left corner you should see an icon of a dot with curved lines going up, this is the icon for a wireless connection, if you see it then your BINGE box is ready to use.
After you have your unit connected to the internet please call the customer support line for additional setup and training walk thru to get you started (888) 419-9666 ext 1 Monday-Fridays 10 am to 6 pm or by phone appointment.